Replacing a memory module
1. Remove the cover. See "Removing the cover" on page 114.
2. Remove the drive bay assembly. See "Removing and replacing the drive bay
3. Locate the memory connectors. See "Identifying parts on the system board" on
4. Open the retaining clips and remove the failing memory module.
5. Make sure the notch 1 on the new memory module is aligned correctly with
6. Replace the drive bay assembly. See "Removing and replacing the drive bay
7. Go to "Completing the FRU replacement" on page 144.
120
Lenovo 3000 J Series
assembly" on page 118.
page 116.
the connector key 2 on the socket. Insert the memory module straight down
into the connector until it snaps into position and the retaining clips are closed.
assembly" on page 118.