Diagnostic Error Codes; Flash The System. See "Flash Update; System Board - Lenovo 7387 Hardware Maintenance Manual

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See
"Running tests" on page 46 for the specific type for information about the
Diagnostic programs.
In the following index, X can represent any number.
56
Lenovo 3000 J Series
Diagnostic Error Code
000-000-XXX
BIOS Test Passed
000-002-XXX
BIOS Timeout
000-024-XXX
BIOS Addressing test failure
000-025-XXX
BIOS Checksum Value error
000-026-XXX
FLASH data error
000-027-XXX
BIOS Configuration/Setup error
000-034-XXX
BIOS Buffer Allocation failure
000-035-XXX
BIOS Reset Condition detected
000-036-XXX
BIOS Register error
000-038-XXX
BIOS Extension failure
000-039-XXX
BIOS DMI data error
000-195-XXX
BIOS Test aborted by user
FRU/Action
No action
1. Flash the system. See "Flash update
procedures" on page 205
2. System board
1. Flash the system. See "Flash update
procedures" on page 205

2. System board

1. Flash the system. See "Flash update
procedures" on page 205
2. System board
1. Flash the system. See "Flash update
procedures" on page 205
2. System board
1. Run Setup
2. Flash the system. See "Flash update
procedures" on page 205
3. System board
1. Reboot the system
2. Flash the system. See "Flash update
procedures" on page 205
3. Run memory test
4. System board
1. Flash the system. See "Flash update
procedures" on page 205
2. System board
1. Flash the system. See "Flash update
procedures" on page 205
2. System board
1. Flash the system. See "Flash update
procedures" on page 205
2. Adapter card
3. System board
1. Flash the system. See "Flash update
procedures" on page 205
2. System board
Information only
Re-start the test, if necessary