Table of Contents
Advertisement
Technical Data
Working pressure range
Electric motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose & gun
Dimensions: Length
Width
Height
Height folded handle 24.25 in (61.5 cm)
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen
Wetted parts, pump & hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range ◆❖
Operating temperature range ✔
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
312082B
0-3000 psi (0-21 MPa, 0 -207 bar)
6.5 AMP (open frame, universal)
1/2
0.31 gpm (1.17 lpm)
1/4 in. x 35 ft
(6.4 mm x 11 m)
0.017 in. (0.43 mm)
15 lb (7 kg)
20 lb (9 kg)
17.5 in. (44.5 cm)
18.0 in. (46 cm)
41.25 in. (105 cm)
18 AWG, 3-wire, 6 ft (1.8 m)
3/4 in. internal thread (standard garden hose thread)
1/4 NPSM external thread
35 mesh (450 micron)
stainless steel, brass, ultra-high molecular weight polyethylene
(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene,
fluroelastomer
SG10: plated steel, nylon, aluminum, tungsten carbide, stainless steel,
brass, fluroelastomer
1500 Watt minimum
120VAC, 60 Hz, 1 phase, 15A
-30° to 160°F (-35° to 71°C)
40° to 115°F (4° to 46°C)
Technical Data
27
Advertisement
Table of Contents
