To Set Only Fan Mode; To Set Dehumidifier Mode - Daewoo DMB-3003LH Owner's Manual

TO SET ONLY FAN MODE

To operate only the fan so the unit will circulate the air, proceed as follows:
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and "ON" will light in the remote display.
3. To select a fan speed, press the FAN SPEED button
until the desired speed appears in the display (see be-
low).
FAN SPEEDS
" " The fan will operate on low speed.
" " The fan will operate on medium speed.
" " The fan will operate on high speed.
"NATURAL" The fan will randomly cycle through the
speeds simulating a breeze.

TO SET DEHUMIDIFIER MODE

Select this mode when there is high humidity. To select, follow the procedures below.
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and "ON" will light in the remote display.
3. Using the TEMP. or
perature. The desired temperature can be changed up
to 32°C and down to 18°C.
buttons, set the desired tem-
2. Press the MODE button until the Fan indicator
appears in the display.
No allowance setting temperature
NOTE:
• If "NATURAL" is selected, the NATURAL" indicator on
the indoor unit will light.
2. Press the MODE button until the Dehumidifier indica-
tor appears in the display.
11