To Operate Only Fan; To Set Unit To Cool Mode - Daewoo DSB-182L Owner's Manual

TO OPERATE ONLY FAN

To operate only the fan so the unit will circulate the air, proceed as follows:
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and "ON" will light in the remote display.
3. To select a fan speed, press the FAN SPEED button
until the desired speed appears in the display (see
below).
FAN SPEEDS
" " The fan will operate on low speed.
" " The fan will operate on medium speed.
" " The fan will operate on high speed.
"NATURAL" The fan will randomly cycle through the speeds
simulating a breeze.

TO SET UNIT TO COOL MODE

To set the unit to cool the room to a desired temperature, follow the procedures below:
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and "ON" will light in the remote display.
or
3. Using the TEMP.
perature. The desired temperature can be changed up
to 32°C and down to 18°C.
AUTO
buttons, set the desired tem-
2. Press the MODE button until the Fan indicator
appears in the display.
No allowance setting temperature
NOTE:
• If "NATURAL" is selected, the NATURAL" indica-
tor on the indoor unit will light.
2. Press the MODE button until the Cool indicator
appears in the display.
4. To select the fan speed, press the FAN SPEED button
until the desired speed appears in the display (see
below).
FAN SPEEDS
"AUTO" The fan will automatically select the fan speed.
" " The fan will operate on low speed.
" " The fan will operate on medium speed.
" " The fan will operate on high speed.
"NATURAL" The fan will randomly cycle through the
speeds simulating a cool breeze.
10