CHANGING/CLEANING THE AIR FILTERS
To change or clean the two black air filters, follow the procedures below:
1. Open the indoor unit's
cover and remove both
black air filters by bending
them slightly backward
and the lifting out.
3. Examine the filters and determine if they need to be
cleaned or replaced. To clean filters, use a vacuum and
clean off dust. Use water and mild soap also if necessary.
5. Insert cleaned or new black
filters back into the unit.
To clean the indoor cover, follow the procedures below:
1. Remove the left and right side to open the indoor cov-
er upward by two
hands.
NOTE: Please remove or
insert the indoor
cover by two
hands.
3. Remove the indoor cover.
3.
(Remove it when cleaning.)
NOTES:
• Wipe the indoor cover with soft sponge or soft cloth.
• When cleaning up it in the state of opening the indoor cover, wipe it with soft cloth.
• After drying it completely in the shade, assemble it.
• If you do not so, it may cause a trouble.
• Reassembly of the indoor cover is reverse process of assembly
CLEANING THE INDOOR COVER
2. Remove the two small
filters (Deodorizing and
Electrostatic) from the
indoor unit.
4. Insert cleaned or new
small filters (Deodorizing
and Electrostatic) back
into the unit.
NOTES:
• The filters should be changed every 6 months.
If in a climate with cold winters, once a year is adequate.
• After getting rid of vinyl in the filter (Deodorizing and
Electrostatic), use it.
2. Pushing forward the indoor cover.
4. Cleaning the indoor cover.
17