Long Page Scanning; Daily Care - Fujitsu fi-6110 Operator's Manual

Chapter 5 Various Ways to Scan

Long Page Scanning

Documents with a length up to 3,048 mm (120 in.) in feed
direction can be scanned by long page scanning.
1
Load documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page
Long page documents should be loaded one sheet at a
time in the ADF paper chute.
Take note of the following when scanning long page
documents:
- Loading
Hold the sheet to prevent it from falling off the ADF
paper chute.
- Removing
Secure enough space around the stacker, and pick
up the ejected sheet to prevent it from falling off the
stacker.
To scan documents longer than A4/Letter size, perform
the following:
Pull out the chute extensions 1 and 2 all the way.
For details, refer to
Chute" (page
Lift up the stacker and stacker extension towards you.
For details, refer to
26).
21).
2
Start up ScandAll PRO and click the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by clicking the [Tool]
menu
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
"1.5 Setting Up the ADF Paper
20).
"1.6 Setting Up the Stacker" (page
[Preferences] to open the [Setup] dialog box,
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan

Daily Care

Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
57