Fujitsu fi-6110 Operator's Manual page 67

Chapter 5 Various Ways to Scan
The following types of documents may not be adjusted
correctly because the page orientation is detected
based on the characters printed on the document:
- Documents scanned at a resolution of less than
200 dpi
- Documents with many extremely large or small
characters
- Documents on which the pitches between lines or
characters are extremely narrow, or characters are
overlapped with each other
- Documents with many photographs or figures and
few characters
- Documents with characters printed in various
directions (e.g. drawings)
- Documents written using only capital characters
- Documents with handwritten characters
- Skewed documents
- Documents written in a language other than the
supported languages: Japanese, English, French,
German, Italian, Spanish, Chinese (Simplified and
Traditional), Korean, Russian and Portuguese.
- Documents with characters on patterned
background
- Documents with a complex layout
- Documents with a large amount of image noise
The language selected in the Windows [Regional and
Language Options] is used for judging the text on the
document.
The image orientation may not be corrected properly
depending on the scanner driver setting at scanning
(e.g. dithering).
If the images are not corrected, try using the Edge
Emphasis function of the driver.
Shadows may remain on the edge of the scanned
image.
[Automatic] in [Rotation Degree] is only available when
ScandAll PRO is installed.
5
Click the [OK] button.
It returns to the [TWAIN Driver (32)] dialog box.
6
Click the [OK] button in the [TWAIN Driver (32)] dialog
box.
The settings are saved.
7
Scan the document by clicking the [Scan] menu
in ScandAll PRO.
TOP
Contents
Index
Introduction
[Scan]
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
67