Configuring Post-Scan Operations And Handling; Automatically Correcting Skewed Images; Troubleshooting - Fujitsu fi-6110 Operator's Manual

Chapter 5 Various Ways to Scan

5.4 Configuring Post-Scan Operations and Handling

Automatically Correcting Skewed Images

When the documents are fed into the ADF skewed, the
skewed images can be detected and straightened
automatically.
Note that upon deskewing the images, the paper size of the
documents are also detected.
Document Output image
Note that the image may be output a few mm larger than the
document to avoid any part of the image to appear missing.
1
Load documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page
2
Start up ScandAll PRO and click the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by clicking the [Tool]
menu
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
3
Click the [Option] button.
The [Option] dialog box appears.
26).
[Preferences] to open the [Setup] dialog box,
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables

Troubleshooting

Operational
Settings
Appendix
Glossary
64