Fujitsu fi-6110 Operator's Manual page 133

Chapter 9 Operational Settings
Item
Page Counter Check the counters to determine when to replace
the consumables.
Also use it to reset the counters after replacing the
consumables.
Power saving Specify the waiting time before entering power
saving mode.
Offset Setting Adjust the position to start the scan on the selected
scanning side(s).
Vertical magnification Adjust the magnification level in feed direction for
Adjustment the selected scanning method.
Description
Total Page Count (ADF) / Pad / Pick Roller
Range: 5 to 235 min. (in increments of 5)
Unit: ADF(Front) / ADF(Back)
Main/Sub/End of page: -2 to +2 mm
(in increments of 0.5)
Unit: ADF
Range: -3.1 to 3.1% (in increments of 0.1)
Parameter/Value
TOP
Contents
Factory Default
Index
0
Introduction
Scanner
Overview
15 min.
How to Load
Documents
Main/Sub/
End of page: 0
mm
Configuring the
Scan Settings
0%
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
133