Note: Assembly of this unit should take two people about 45 minutes to properly assemble.
STEP #1.
Attach the Front Stabilizer (76) to the bottom
front portion of the Base Frame (67) using
the screw (19), washer (65), nylock nut (20),
and plastic cap (21) combination as shown
in illustration #1.
STEP #2.
Attach the Rear Stabilizer (77) to the bottom
back portion of the Base Frame (67) using
the screw (19), washer (65), Nylock nut (20)
and plastic cap (21) combination as shown
in illustration #2.
ASSEMBLY INSTRUCTIONS
21
20
65
19
Illustration #1
67
Illustration #2
10
67
76
21
20
65
77
19