Chapter 4 Hardware Settings - TMC TI5VG User Manual

Chapter 4 Hardware Settings

The following sections describe the necessary procedures and proper
jumper settings to configure the TI5VG motherboard.
4.1 SW1(1-7): CPU Frequency Selector ......................................... 15
4.2 SW2(1-4): CPU Voltage Selector ............................................. 17
4.3 JP8: Clear CMOS Selection ...................................................... 19
For the locations of the jumpers, refer to Figure 2 on the following page.
The following examples show the conventions used in this chapter
TI5VG Pentium VP3 ATX Motherboard User's Manual
Chapter 4 Hardware Settings
Jumper Open
Jumper Closed
Switch 1 and switch 2 are set to OFF.
Switch 3 and switch 4 are set to ON.
13