None Key - Aastra 6757I User Manual

None Key

You can set a softkey, or expansion module key to force a blank entry on the IP phone display for
a specific key. You do this by setting the key to "none". The keys are added in order (from key1
to key20) after any hard-coded keys have been added. If a particular key is not defined, it is
ignored. For more information about key behavior, see
Configuring a None Key
Aastra Web UI
Use the following procedure to configure a None key on the 6757i IP Phone. The procedure
shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select None.
142
"Key Display Behavior"
Model 6757i IP Phone User Guide
on page 66.