Table of Contents
Advertisement
System Diagnostics
Installation
Verify that all system components have been properly installed. If one or more
components appear to be malfunctioning, test them in an alternate environment
where you are sure that all the other components are functioning properly.
Transmission Mode
Be sure each port on the SwitcHub is set to the same transmission mode as the
attached device; i.e., full duplex or half duplex. (Refer to
tion Mode
in Chapter 3 for a detailed description.)
Cabling
1. Verify that the cabling type is correct. Be sure all cable connectors are
securely seated in the required ports. Straight-through cable should be used
for all standard twisted-pair connections; and multimode cable with SC or
ST type connectors should be used for fiber optic connections.
2.
Make sure all devices are connected to the network. Equipment may have
been unintentionally disconnected from the network.
External Adapters
Make sure the network adapter cards installed in the workstations are
compatible with your network media type and are in good working condition.
A-2
Fast SwitcHub-2se User's Guide
Troubleshooting
Setting the Communica-
Advertisement
Table of Contents
