Vlan Commands - D-Link DES-3010F Command Line Interface Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
create vlan
delete vlan
config vlan
show vlan
Each command is listed, in detail, in the following sections.
create vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a VLAN v1, tag 2:
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN v1:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Parameters
<vlan_name 32> {tag <vlanid 2-4094>}
<vlan_name 32>
<vlan_name 32> {[add [tagged | untagged] | delete] <portlist>}
{<vlan_name 32>}
Used to create a VLAN on the Switch.
create vlan <vlan_name 32> {tag <vlanid 2-4094>}
This command allows the creation of a VLAN on the Switch.
<vlan_name 32> − The name of the VLAN to be created.
tag <vlanid 2-4094> − The VLAN ID of the VLAN to be created.
Allowed values = 2-4094. VLAN 1 is reserved for the default VLAN set
originally on the Switch.
Each VLAN name can be up to 32 characters. Only administrator-level
users can issue this command.
DES-3026:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DES-3026:4#
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only administrator-level users can issue this command.
105
17
VLAN C
OMMANDS