NOTE:
For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
See
Server maintenance and service guide, located on the Easy Set-up CD, the
1
support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
"Power-on problems flowchart (on page 64)"
2
"HP Insight Diagnostics (on page 48)"
3
4
•
"Hardware problems (on page 71)"
•
Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
"HP contact information (on page 103)"
5
Troubleshooting 70