Install the hard drive.
5.
Close the bezel.
6.
Resume normal server operations.
7.
Determine the status of the drive from the hot-plug SAS hard drive LED combinations
8.
hard drive LED
Hard drive LED cable option
This section provides the following procedures:
•
Installing the LED cable (ML110 G4) (on page 24)
•
Installing the LED cable (ML150 G3) (on page 27)
•
Installing the LED cable (ML110 G5, ML115 G5, and ML150 G5) (on page 29)
combinations" on page 60).
("SAS and SATA
Hardware options installation 23