HP ProLiant ML100 Series User Manual page 65

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty power supply
•
Loose or faulty power cord
•
Power source problem
•
Power on circuit problem
•
Improperly seated component or interlock problem
•
Faulty internal component
Item See
Server maintenance and service guide, located on the Easy Set-up CD, the
1
support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
"General diagnosis flowchart (on page 62)"
2
"Loose connections (on page 58)"
3
"Power source problems (on page 72)"
4
5 •
"Power supply problems (on page 72)"
•
Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
"System open circuits and short circuits (on page 83)"
6
Troubleshooting 65