HP ProLiant ML100 Series User Manual page 36

Remove the access panel
3.
Access the removable media cage.
4.
Remove the bezel blank.
5.
NOTE: HP recommends that you remove all bezel blanks to facilitate drive installation.
Depending on the server, obtain the screws from one of the following locations:
6.
Bezel blank
o
Chassis
o
Accessory kit
o
Install the screws on the media device:
7.
For the HP ProLiant ML110 Generation 5 Server, install the screws in the top screw holes.
o
For all other servers, install the screws in the bottom screw holes.
o
("Access panel" on page 11).
Hardware options installation 36