Installing A Processor In Hp Proliant Ml110 Generation 5 Servers - HP ProLiant ML100 Series User Manual

Install the heatsink. Refer to the installation sheet for server-specific installation instructions.
7.
Install the PPM (if applicable). Refer to the server hood labels or user documentation for specific
8.
information on how to install a PPM.
Install the access panel.
9.

Installing a processor in HP ProLiant ML110 Generation 5 Servers

The server uses an embedded PPM as a DC-to-DC converter to provide the proper power to the processor.
To install the component:
Power down the server (on page 6).
1.
Extend the server from the rack.
2.
Remove the access panel
3.
("Access panel" on page 11).
Hardware options installation 16