HP ProLiant ML100 Series User Manual page 28

Secure the cable with the cable tie.
6.
Install the access panel.
7.
Power up the server (on page 6).
8.
Cabling an HP 8 Internal Port SAS/SATA Host Bus Adapter with RAID card (ML150
G3)
Power down the server (on page 6).
1.
Remove the access panel
2.
Install the card.
3.
For more information, see the documentation that ships with the option and see "Expansion board
options (on page 42)."
Connect the LED cable to the card and to the system board.
4.
Unfasten the cable tie.
5.
("Access panel" on page 11).
Hardware options installation 28