XG2600 Hardware Guide
Front-Access Configuration (User Configured)
The interface side (SFP+ slots) is facing forward in a rack.
Caution
• Do not install PSUs facing the front side of the rack. They do not work properly
• Before installing the switch in the rack, check if the airflow direction of the fans is correct. If the
air flows incorrectly, it may cause failure to the switch.
FAN1
PSU1
PSU2
(Caution)
(Caution)
XG2600
Exhaust
FAN2
Intake
31
Chapter 2 Installation
Rack Rear
Rack Front
Installation of the switch