Fujitsu XG2600 Hardware Manual page 47
Compact 26 port 10 gigabit ethernet layer 2 switch
Hide thumbs
Also See for XG2600:
- Hardware manual (59 pages) ,
- Specifications (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
XG2600 Hardware Guide
Precautions
Cable length will be as below based on the specification of the optical fiber cable.
Type
MMF
Use the appropriate cable according to the installation place.
Replacing SFP+ Module
Precautions
It is possible to install/replace SFP+ module with the power on.
When replacing SFP+ module, follow the process below.
1.
Make the replacing SFP+ slot to the "disable status".
•
In case of using telnet or console
Enter replacing SFP+ slot number in <port>
# offline ether <port>
•
In case of using www browser
Make the SFP+ slot number to the selective status by "Setting of physical port" of settings menu.
Select "Disuse" of "Use of Physical Port", and click "Regist" icon.
Refer below for how to display top page of the switch.
Reference
User's Guide
"1.2
2.
Replace the SFP+ module after removing optical cable, and then install the SFP+ module.
Core/Cladding Diameter
62.5/125 µ m
50/125 µ m
8
"Using the Web Interface"
Minimum Transimission Band
160MHz/km
200MHz/km
400MHz/km
500MHz/km
2000MHz/km
" (pg.9)
47
Chapter 2 Installation
Cable Length (m)
26
33
66
82
300
Connecting the Equipment
Advertisement
Table of Contents
