Table of Contents
Advertisement
FS-8704-12_GE-EGD Manual
5.3.
Server Side Map Descriptors
5.3.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
5.3.2.
Column Title
Node_Name
Length
The
following
keywords
only to the GE-
EGD protocol.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
FieldServer Specific Map Descriptor Parameters
Function
Name of this Map
Descriptor
Name of Data Array
where data is to be
stored in the
FieldServer
Starting location in
Data Array
Function of Client
Map Descriptor
Driver Specific Map Descriptor Parameters
Name of Node to fetch data from
Length of Map Descriptor
Only one
Map Descriptor may be
configured for each exchangeID. Each
produced exchange is thus limited to one
apply
data type and to data from one Data
Array.
This is different from the
configuration
Descriptors.
Up to 32 alphanumeric characters.
The Map Descriptor name can be any
name that has meaning to you and in
fact duplicate name will not produce an
error.
This driver recognizes a special Map
Descriptor name; "EGD-ii". It stands for
EGD Internal Indications. Its use is
more fully explained in section 6 of this
manual.
One of the Data Array names from
"Data Array" section above
0 to maximum specified in "Data Array"
section above
WRBC
Function
of
consumer
Map
Page 13 of 26
Legal Values
Legal Values
One
of
the
names
specified
"Producer
Descriptor" above
1 - 1000
node
in
Node
Advertisement
Table of Contents
