Digital Output - D-Link DCS-7510 User Manual

Section 3 - Configuration
Digital Output (DO) feature enables you to configure your DO port to send signals whenever certain events occur.
Enable D/O This enables the D/O to send a signal when there
signal: is a triggered event.
Trigger Event: Use the checkboxes to configure the camera to
send a signal through the D/O port whenever
motion is detected, or when a signal is detected
on D/I port 1 or D/I port 2.
Click Save Settings to save your changes, or click Don't
Save Settings to discard your changes.
D-Link DCS-7510 User Manual
SETUP > Digital Output
52