D-Link Dcs-7510 User Manual - D-Link DCS-7510 User Manual

Section 3 - Configuration
Recording Options
Resolution:
Select the pre-defined profile you wish to use to record
video.
Record until:
Select to adjust how much free space must remain when
recording. It is suggested that you set this to at least 32MB
to allow for enough buffer space for the camera to record
with.
When Storage is
When your storage device is full or has reached the free
full:
space limit specified in Record until, you can choose to stop
recording, or you can have the camera delete old recordings
to free space for new recordings to be saved.
Event Based:
Allow you to record video when specific events happen.
Motion detection
Enabling this option will set the camera to record video when
triggered recording:
motion is detected by the camera.
Prerecord: Preset amount of time before motion recording is triggered.
Postrecord: Preset amount of time after motion recording is triggered.
Example: Using motion detection triggered recording and
setting Prerecord to 5 seconds and Postrecord to 9 seconds,
the camera will save video from 5 seconds before motion was
detected to 9 seconds after motion was detected.
Continuous:
This will set the camera to record continuously.
Scheduled:
Select to manually configure the start and end time for
recording.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes

D-Link DCS-7510 User Manual

.
48