D-Link DCS-7510 User Manual page 31

Section 3 - Configuration
You can access various functions by clicking on the buttons at the bottom of the window:
Video Profile: There are four different viewing profiles, which you can
configure in Setup > Audio and Video.
Full Screen: This allows you to view the video in full screen mode. To exit
full screen mode, press the ESC key on your keyboard.
Snapshot: Click to capture a snapshot image. The image will pop up in a
new window. You may save this image to a local hard drive.
Record Video: Clicking this button will start or stop recording video to the
file path specified with the Set Storage Folder button.
Set Storage Folder: You can change the folder where the video recordings
will be saved.
Start/Stop Audio: This button toggles the microphone on and off, allowing
you to hear audio from the area surrounding your camera.
Start/Stop Talking: This button toggles the speaker on and off, allowing
you to talk with others near your camera.
Start/Stop Digital Output: This will toggle the GP DO output on and
off.
IR LED ON/Off: This button can enable/disable the IR LEDs under the low
illumination environment. Note that the live video will turn to black and white
mode when IR LEDs turned on.
D-Link DCS-7510 User Manual 31