Snapshot - D-Link DCS-7510 User Manual

Section 3 - Configuration
Snapshot enables your camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail
address and/or to an FTP server.
Enable Check this box to enable the snapshot feature.

Snapshot:

Event Based:
Select one or more events to trigger a snapshot, such as Motion
Detection, D/I Signal 1 and D/I Signal 2.
Continuous
This will set the camera to take snapshots continuously at
(FTP only):
intervals specified in FTP Server > Interval below. You
can only save to an FTP server when taking continuous
snapshots.
Scheduled
This will set the camera to take snapshots continuously at
(FTP only): intervals specified in FTP Server > Interval below according
to schedule you define by checking days and entering the
times you want to record between. You can only save to an
FTP server when taking scheduled snapshots.
E-mail The camera will send the snapshots to the e-mail address
Address: specified in the following text boxes. If you do not know what
to enter for the User Name, Password, or SMTP Mail Server,
contact your e-mail service provider for details.
User Name:
Enter the username or login name for your e-mail
account.
Password:
Enter the password for your e-mail account.
SMTP Mail
Enter the SMTP server for your e-mail account.
Server:
D-Link DCS-7510 User Manual
SETUP > Snapshot
50