Introduction We thank you for having chosen a Univox® product and hope that you will be satisfied. Univox® AutoLoop 2.0 is a fully automatic loop amplifier for wireless listening through your hearing instrument. Connect your TV, stereo, MP3, microphone or any other audio source with a 3.5mm connector to the AutoLoop.
If this is the case with your TV, use Univox® TV Sync. Connect the audio source to the TV Sync’s 3.5mm input socket or to the SCART socket. Then connect the TV Sync’s 3.5mm connector to AutoLoop’s Line input socket.
Settings Univox® AutoLoop 2.0 is fully automatic. No settings are needed. If you experience the sound level in the loop being too high, you can lower the level in two steps by using the level control marked at the bottom of the product.
Technical information For additional information, please refer to product data sheet/brochure and CE certificate which can be downloaded from www.univox.eu. If required, spare part lists or other technical documents can be ordered through support@edin.se. Environment Please follow existing disposal regulations in your country. If you respect these instructions...
Page 8
Distributor Univox by edin, the world’s leading expert and producer of high quality hearing loop systems, created the very first true loop amplifier 1969. Ever since our mission is to serve the hearing community with the highest degree of service and performance with strong focus on Research and Development for new technical solutions.
Need help?
Do you have a question about the AutoLoop 2.0 and is the answer not in the manual?
Questions and answers