Adjusting The Temperature - Tekmar 541 Data Brochure

Adjusting the Room Set Temperature (No Schedule)
If no schedule is being used, the heating temperature can be permanently adjusted from the View menu when viewing
either the "Room" or "Room Set" items.
OR
Adjusting the Room Set Temperature (Schedule)
When using a schedule, the heating temperature for each
schedule event can be permanently changed from the Adjust
menu. There will be one "Set Heat" item in the Adjust menu
for each scheduled event.
In a two event schedule, the events are:
• Occ (Occupied)
Current schedule
status indicates a
schedule is in use
Temporary Room Set Adjustment (Schedule Only)
Pressing the up or down button while viewing the Room
or Room Set temperature during scheduled operation
allows for a temporary change in temperature. When the
temporary change is in effect, the words "TMPY HOLD"
are shown on screen.
OR
© 2007 D 541 - 08/07
Press Up or Down
Button to adjust the
heating temperature.
• UnOcc (UnOccupied)
Wait 10
seconds
In a four event schedule, the events are:
• Wake
• UnOcc
When scenes are used, an additional 'Away' event is
available.
If a schedule is not in use, only the Set Heat Occ setting
is available.
Press Up or Down
Button to adjust the
"Wake" temperature.
The temporary change lasts for 3 hours but can be
cancelled before this by pressing the Up and the Down
buttons at the same time.
Wait 10
seconds
12 of 24
Section C1
Section C2
• Occ
• Sleep
Press Up or Down
Button to adjust the
"UnOcc" temperature
Section C3
Press Up and Down
buttons at the same
time to cancel the
temporary hold.