Registering Settings By Requirement - Kyocera TASKalfa 250ci Operation Manual

Registering Settings by Requirement

To register settings by each reception requirement, follow the steps below. Up to 100 requirements can be
registered.
FAX - RX/Forward Requirements
Print or forward the received file according to
requirements.
On ID Requirement Name
Off
01
FAX A
Change Setting
by Requirement
Use Requirements
for All RX
Detail Delete
Status
OPERATION GUIDE
1
2
3
4
Priority
1
1/1
Raise Priority Add
Cancel OK
2008/10/10 10:10
5
6
7
8
9
NOTE:
Character Entry Method on page 2 of the Appendix.
Up to 32 characters can be entered for the requirement
name.
10
11
12
FAX Operation (Advanced)
Press the System Menu key.
Press [FAX], and then [Next] of RX/Forward
Requirements.
Press [Change Setting by Requirement].
Press [Add].
Press [Change] of Requirement Number.
Press [+] or [-] or use the numeric keys to enter the
requirement number. You can enter the
requirement number between 001 and 100.
Press [OK].
Press [Change] of Requirement Name.
Enter the requirvement name, and press [OK].
For details on character entry, refer to
Press [Change] of Requirement.
To forward fax reception, select [FAX] and press
[Next].
Register the requirements.
4
4-21