Dell S300wi User Manual page 70

In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See "Installing the Antenna" on page 13.
2 Enable wireless connection on the projector. See "WIRELESS /
NETWORK" on page 56.
NOTE:
When you start wireless, please wait about 50 seconds reboot the
Wireless / Network.
3
On INPUT SELECT menu, select Multiple Display and then select Wireless
display on sub-menu. See "INPUT SELECT" on page 46. The Wireless
Guide Screen shown below appears.
4 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
5
Connect your computer to the S300wi network.
70 Using Your Projector