Dell S300wi User Manual page 95

Projector Control Panel
Projector Information
• Projector Status: There are 5 status: Lamp On, Standby, Power Saving,
Cooling and Warming up. Click the Refresh button to refresh the status and
control settings.
• Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes. For
more information, see "Power Saving" on page 60.
• Alert Status: There are 3alert status: Lamp warning, Low lamp life, and
Temperature warning. Your projector might lock up in protection mode if
any of the alerts are activated. To exit protection mode, click the Clear
button to clear the Alert Status before you Power ON your projector.
Using Your Projector 95