Dell S300wi User Manual page 61

P —
When Password Protect is enabled, a Password Protect screen
ASSWORD
requesting you to enter a password will be displayed when the power plug is
inserted into the electrical outlet and the power for the projector is first
turned on. By default, this function is disabled. You can enable this feature,
by selecting Enabled. If the password has been set before, key in the
password first and select the function. This password security feature will
be activated the next time you turn on the projector. If you enable this
feature, you will be asked to enter the projector's password after you turn
on the projector:
First time password input request:
1
Go to Others menu, press
a
Enable the password setting.
Enabling the Password function will pop up a character screen,
b
key in a 4-digit number from the screen and press
To confirm, enter the password again.
c
If the password verification is successful, you may resume with
d
accessing the projector's functions and its utilities.
and then select Password to
Using Your Projector
.
61