Troubleshooting & Repair; Ordering Replacement Parts - Cumberland Stove Works MF3800 Operator's Manual

When the unit is cleaned out, empty the hopper, take
the venting apart and clean out the fly ash, rinse and
let dry. Inspect the draft blower and clean out all areas.
Clean the glass, doors and outer cabinet so that you are
ready for the next heating season. Use of an ash vacuum
makes cleaning easier and faster.
TROUBLESHOOTING & REPAIR
At Ardisam, we build quality and durability into the design
of our products; but no amount of careful design by us, and
careful maintenance by you, can guarantee a repair-free
life for your stove. Most repairs will be minor, and easily
fixed by following the suggestions in the troubleshooting
guide in this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on
your retailer, an authorized service center or Ardisam, Inc.
A parts catalog is included in this section.
We will always be glad to answer any questions you have,
or help you find suitable assistance. To order parts or inquire
about warranty, call or write us at the address found below,
under the section ordering repair parts.

ORDERING REPLACEMENT PARTS

Parts can be obtained from the store where the stove was
purchased or direct from the factory. To order from the fac-
tory- call, write or e-mail to:
Ardisam, Inc.
360 First Avenue, Cumberland, Wisconsin 5489
-800-345-6007 • -75-8-45
E-mail: info@ardisam.com
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
Page 
Figure 26: Cleaning tool.
Figure 27: Heat exchanger scraper rod.
Figure 28: Removable fire plate.
CumberlandStoveWorks.com
INSTALLATION AND OPERATION MANUAL
MF3700, MF3800 Models
800-345-6007