Radio Cloning; Cloning Radio Settings; Cloning Instructions; Cloning Radios Using The Clp Series - Motorola CLP1013 User Manual

RADIO CLONING

CLONING RADIO SETTINGS

You can copy the CLP Series radio settings from
one radio (the source) to a second radio using the
CLP Series Single Unit Charger (SUC) Kit P/N
HKPN4008 and CLP Series Cloning Cable Kit
P/N HKKN4026 (optional accessory) or CLP
Series Multi-Unit Charger (MUC) Kit
P/N HKPN4007 (optional accessory).
A multi-channel radio can be cloned to a single-
channel radio BUT only the first channel is cloned.
The Multi-Unit Charger (MUC) does not have to be
plugged in for cloning, but both radios require
charged batteries
24
English
.

CLONING INSTRUCTIONS

Cloning Radios using the CLP Series

Cloning Cable Kit P/N HKKN4026 (optional

accessory)

Cloning the Radio through a Single
Unit Charger
Source Radio: Radio to be cloned
Target Radio: Radio to which the configuration
of the "Source Radio" will be
copied.
Before beginning the cloning process, make
sure you have:
• A fully charged battery on each one of the
radios
• Two CLP Series Single Unit Charger (SUC) Kits
• Both radios are turned OFF
1. Unplug any cables (power supply or USB
cables) from the Single Unit Chargers.