Monitoring a Channel
1.
To activate, press the Menu button to navigate
to Monitor mode.
2.
When Monitor is OFF, you will hear the voice
prompt: "Monitor" – "To activate" – "press +/-".
3.
Press either "+/-" button to activate the Monitor;
press either "+/-" button again to deactivate.
Note:
When Monitor is ON, you will hear static if
no activity is present or audio if channel
activity is present.
4.
To engage the Monitor mode, enable Monitor via
the menu and let the menu time out.
5.
To deactivate, press PTT during Monitor Menu
mode.
10
English
Scanning
(*) For multi-channel models only
You can scan up to 4 channels on CLP 1043
models and scan up to 6 channels on CLP1063
models. When the radio detects activity, it stops
scanning and locks in on the active channel.
This allows you to talk and listen to the person
transmitting without changing channels.
1.
Press the Menu button to navigate to Scan
mode.
2.
When Scan is OFF, you will hear the voice
prompt: "Scan" – "To activate" – "press +/-".
3.
Press either "+/-" button to activate the Scan;
press either "+/-" button again to deactivate.
4.
When Scan is on, you will hear the voice
prompt: "Scan" – "To deactivate" – "press +/-"
button.