Wireless Access Point - Cisco 860 Series Hardware Installation Manual

Wireless Access Point

Table A-1
Description
Environmental Operating Ranges
Router Power Adapter
Inline Power-over-Ethernet Adapter
Wireless Access Point
Table A-2
Table A-2
Description
Radio technology
Operating frequency
Channels
PHY Data rate
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
A-2
Router Specifications
Nonoperating temperature
Nonoperating humidity
Nonoperating altitude
Operating temperature
Operating humidity
Operating altitude
Noise criterion
Input voltage
Input frequency
Power output
Output voltages
Input voltage
Input frequency
Power output
Output voltage
lists the specifications for the wireless access point (AP).
Wireless Access Point Specifications
Appendix A
Design Specification
–4 to 149°F (–20 to 65°C)
5 to 95% relative humidity
0 to 15,000 ft (4570 m)
32 to 104°F (0 to 40°C)
10 to 85% relative humidity
0 to 10,000 ft (3000 m)
NC- 33; less than or equal to 32 dBA
85 to 264 VAC
47 to 63 Hz
60 W maximum
+12 VDC
85 to 264 VAC
47 to 63 Hz
80W maximum
–48 VDC
Design Specification
IEEE 802.11n draft 2.0 standard compliant. 2x3
MIMO radio. Backward compatible with
802.11b/g.
2.4-GHz radio band
Country-specific 20 and 40 MHz
802.11b up to 11 Mbps
802.11g up to 54 Mbps
802.11n up to 300 Mbps
Technical Specifications
OL-16193-01