Connecting Power Over Ethernet; Connecting The Ac Adapter - Cisco 860 Series Hardware Installation Manual

Chapter 3 Connecting the Router

Connecting Power over Ethernet

Figure 3-8
Cisco 880 series ISR to an AC power outlet. The PoE provides power to port 0 and port 1 of the 4-port
10/100 FastEthernet switch.
The router should also be connected to an AC power outlet through a 12-V adapter. To connect the router
Note
to an AC outlet, see
Figure 3-8
1
2
3

Connecting the AC Adapter

The device is designed to work with TN power systems. Statement 19
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
a fuse or circuit breaker no larger than 120VAC, 20A U.S. (240VAC, 16 to 20A international) is used on
the phase conductors (all current-carrying conductors). The fuse or circuit breaker must have
adequate safety approvals recognized by the country of usage. Statement 119
OL-16193-01
shows how to connect the 48-VDC Power over Ethernet (PoE) power adapter in your
"Connecting the AC Adapter" section on page
Connecting PoE
4
4
PoE input jack
Power cord
Power adapter—48 VDC
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
3-11.
1
2
3
4 AC plug
5 DC plug
6
Power adapter—60 W, 12 VDC
Connecting Power over Ethernet
5
2
6
3-11