Additional Items; Ethernet Devices - Cisco 860 Series Hardware Installation Manual

Equipment, Tools, and Connections
Table 2-1
Item
Power supply cable
Cisco Configuration Professional (CCP) CD
1. Cisco 861 and Cisco 881 ISRs only.
2. DSL = digital subscriber line.
3. Cisco 888 ISRs only.
4. Some SKUs do not include CCP.

Additional Items

The following items are not shipped with the router, but are required for installation:
•
•
•
•
•
•
Connections
Obtain a broadband or Ethernet connection from your service provider.

Ethernet Devices

Identify the Ethernet devices that you will connect to the router: hub, servers, and workstations or PCs.
Ensure that each device has a network interface card (NIC) for connecting to Ethernet ports.
•
•
•
•
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
2-2
Items and Their Quantities That Are Shipped with the Cisco 860 Series And Cisco 880
Series ISRs (continued)
ESD-preventive cord and wrist strap.
Screws for mounting the router on a wall:
Two number-10 wood screws (round- or pan-head) with number-10 washers, or two number-10
–
washer-head screws, for mounting on a wall stud. The screws must be long enough to penetrate
at least 3/4 in. (20 mm) into the supporting wood or metal wall stud.
Two number-10 wall anchors with washers, for mounting the router on a hollow-wall.
–
Wire crimper for chassis grounding.
Wire for connecting the chassis to an earth ground:
2
AWG 14 (2 mm ) or larger wire for NEC-compliant chassis grounding.
–
2
AWG 18 (1 mm ) or larger wire for EN/IEC 60950–compliant chassis grounding.
–
A ring terminal with an inner diameter of 1/4 in. (5 to 7 mm), for NEC-compliant chassis grounding.
Ethernet cables for connecting to the Fast Ethernet (FE) WAN and LAN ports.
If you plan to configure the software using Cisco IOS commands through the console port, provide
an ASCII terminal or a PC that is running terminal emulation software to connect to the console port.
If you plan to connect a modem, provide the modem and modem cable.
If you plan to use the Data BRI port, provide an NT1 device and an ISDN S/T cable.
If you plan to use the cable-lock feature, provide a Kensington or equivalent locking cable.
Cisco 860 Series Cisco 880 Series
Routers Routers
1 1
4
1 1
Chapter 2 Installing the Router
OL-16193-01