Calibrated Data Rate; Dpc Margin; Nominal Power Level; Max Data Rate - Comtech EF Data Vipersat CDD-562L User Manual

MN/22137, rev 1

Calibrated Data Rate

This is the Baseline Home State Data Rate and is used as the base reference
value to calculate the maximum DPC Margin.

DPC Margin

The Margin setting governs the upper power limit for all combinations of wave-
forms given.

Nominal Power Level

This is the Baseline Home State modulator Power Level and is used as the base
reference value to calculate the maximum DPC Margin.

Max Data Rate

This is the Maximum Data Rate achievable as calculated through site budgetary
numbers.

Max Code Rate

This is the Maximum Code Rate achievable as calculated through site budgetary
numbers.

Max Modulation

This is the Maximum Modulation achievable as calculated through site budget-
ary numbers.

Max FEC Type

This is the Maximum FEC Type achievable as calculated through site budgetary
numbers.

Calculate Max Power

This is the command to generate a maximum achievable modulator site power
as calculated using each of the budgetary numbers. If the entrance link cabling
attenuation and High Power Amplifier gain variables are balanced, the calcula-
tion will return a modulator output value within equipment limits. If any one of
these uplink variables is under or over, the returned value will display
INVALID.
See "Signal Power Level Considerations" on page C-15 for more information.
A p p e n d i x C - D y n a m i c P o w e r C o n t r o l
Configuration
C-13