Figure B-17 Ecm Remote List Page, Cdm-570; Figure B-18 Remote Bandwidth Entry, Cdm-570 - Comtech EF Data Vipersat CDD-562L User Manual

E n t r y C h a n n e l M od e S w i t c h i n g
2. From the STDMA Remote List, select the Remote modem unit to be
3. Click the Modify... button to display the Remote Entry dialog shown in
4. To force a switch from ECM SCPC mode to STDMA mode, set the current
B-30
Figure B-17
switched from running in SCPC to STDMA mode. Use the up and down
arrows next to the Modify button to change the selected Remote.
figure B-18.
Figure B-18
value in the SCPC Data Rate dialog box to 0 (zero), then click the OK
button.
Note that the 0 bps setting will cause the modem to remain in STDMA ECM
ECM Remote List Page, CDM-570/570L
Remote Bandwidth Entry, CDM-570/570L
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e
MN/22137, rev 1