Maintenance And Servicing; Cleaning, Maintenance, And Lubrication - Chicago Electric 91938 Set Up And Operating Instructions Manual

MAinTEnAnCE AnD
SErViCing
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
FrOM ACCiDEnTAl
OpErATiOn:
release the Trigger, unplug the
tool from its electrical outlet and
allow the wheel to cool
completely before performing
any inspection, maintenance, or
cleaning procedures.
TO prEVEnT SEriOUS injUrY
FrOM TOOl FAilUrE:
Do not use damaged equipment.
if abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, Maintenance, and
lubrication
1. bEFOrE EACH USE,
general condition of the tool. Check for
loose hardware, misalignment or binding
of moving parts, cracked or broken parts,
damaged electrical wiring, and any
other condition that may affect its safe
operation.
2. AFTEr USE,
the tool with clean cloth.
3. WArning! if the supply cord of
this power tool is damaged, it must be
replaced only by a qualified service
technician.
Page 12
TO prEVEnT
SEriOUS injUrY
inspect the
wipe external surfaces of
For technical questions, please call 1-800-444-3353. SKU 91938