Chicago Electric 97360 Owner's Manual & Safety Instructions

Chicago Electric 97360 Owner's Manual & Safety Instructions

1-1/2 horsepower 7" bridge tile saw with stand
Hide thumbs Also See for 97360:

Advertisement

Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Keep this manual and the receipt in a safe and dry place for future reference.
1-1/2 HORSEPOWER
7" BRIDGE
TILE SAW
WITH STAND
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
please call 1-888-866-5797 as soon as possible.
©
©
Copyright
Copyright
2007 by Harbor Freight Tools
2007 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
®
. All rights reserved.
. All rights reserved.
Read this material before using this product.
Read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
REV 15c

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 97360 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chicago Electric 97360

  • Page 1 Owner’s Manual & Safety Instructions Owner’s Manual & Safety Instructions Save This Manual Save This Manual Keep this manual for the safety warnings and precautions, assembly, Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the operating, inspection, maintenance and cleaning procedures.
  • Page 2: Important Safety Information

    Save all warnings and instructions overheating. Table A shows the correct for future reference. size to use depending on cord length and nameplate ampere rating. If in doubt, use Item 97360 For technical questions, please call 1-888-866-5797. Page 2...
  • Page 3: Grounding Instructions

    Item 97360 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 (one blade is wider than the other). This Spreaders, except riving knives, must plug will fit in a polarized outlet only one Item 97360 For technical questions, please call 1-888-866-5797. Page 4...
  • Page 5: Extension Cords

    Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord. WARNING – To reduce the risk of electrocution, keep all connections Item 97360 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Vibration Safety

    Some examples of these worsened from use. Pregnant women or chemicals are: people who have impaired blood circulation • Lead from lead-based paints to the hand, past hand injuries, nervous Item 97360 For technical questions, please call 1-888-866-5797. Page 6...
  • Page 7 (while still keeping safe control of it). Let the tool do the work. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 97360 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Specifications

    Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Item 97360 For technical questions, please call 1-888-866-5797. Page 8...
  • Page 9 BOLTS (98), SUPPORT SPRING (111) WASHERS (95), WASHERS (94) Attach the Handle (38) to the Motor Support (111), using the Bolts (98), Spring Washers (95), and Washers (94). (See Figure 5.) Item 97360 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Wheel Assembly

    FIGURE 7C Note: Bolts should be inserted from outside, through the leg stand and into the wheel. Washers and Nuts to be placed onto the Bolts from the wheel side. Item 97360 For technical questions, please call 1-888-866-5797. Page 10...
  • Page 11: Tool Set Up

    Wear ANSI approved safety glasses under an ANSI approved full face safety shield and non-skid safety shoes. Hearing and breathing protection must be used for appropriate conditions. Item 97360 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 NOTE: If the Motor of the Tile Saw stops suddenly while cutting, turn the Power Switch (37) to its “OFF” position. Wait approximately 5 minutes. While making sure your hands are dry, reset the Circuit Item 97360 For technical questions, please call 1-888-866-5797. Page 12...
  • Page 13 To cut the tile, follow the same procedure as outlined in the section To cut the tile, follow the same “To Make A Straight Cut”. procedure as outlined in the section “To Make A Straight Cut”. Item 97360 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 (See Figure 16.) CAUTION! Never FLANGE ROTATION flip over a used Saw Blade. ARROW NUT (6) BLADE FIGURE 16 With one Wrench (71), hold the end of the Motor Spindle firmly and with Item 97360 For technical questions, please call 1-888-866-5797. Page 14...
  • Page 15 Once the Saw Blade (4) is installed, reattach the Outside Flange (5) and Nut (6). Fasten the Nut by turning it counterclockwise until snug. Do not overtighten. (See Figure 16.) Item 97360 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Maintenance And Servicing

    Pump if the unit contains water in any debris on the Filter and Impeller. If freezing temperatures. Store the Tile necessary, replace the old Filter. When Saw indoors in a dry, frost-free room. Item 97360 For technical questions, please call 1-888-866-5797. Page 16...
  • Page 17: Troubleshooting

    BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 97360 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18: Parts List

    Rail Stand Support 45° Angle Cutting Motor Cover Rail Stand Spacer Guide Hex Nut Lock Washer Switch Cover Round Water Tube Table Support Holder Bushing Circuit Breaker Tube Connector Water Tray Item 97360 For technical questions, please call 1-888-866-5797. Page 18...
  • Page 19: Assembly Diagram

    ASSembly DIAgrAm ASSEMBLY DIAGRAM Please Note: Saw Blade (4) is sold separately and not included. Item 97360 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Limited 90-Day Warranty

    LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents

Save PDF