Reebok R 6.90 User Manual page 16

HOW TO USE A PRESET WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2. Select a preset workout.
To select a preset work-
out, press the Aerobic
Workouts button or the
Performance Workouts
button repeatedly until
the number of the de-
sired workout appears in the display.
When you select a preset workout, the display will
show the name, duration, maximum speed setting,
and maximum incline setting of the workout. In ad-
dition, a profile of the speed settings of the workout
will scroll across the matrix.
Each preset workout is divided into one-minute
segments. One speed setting and one incline set-
ting are programmed for each segment. Note: The
same speed and/or incline setting may be pro-
grammed for consecutive segments.
3. Start the walking belt.
Press the Start button or the Speed increase but-
ton to start the workout. A moment after you press
the button, the treadmill will automatically adjust to
the first speed and incline settings of the workout.
Hold the handrails and begin walking.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
4. Monitor your progress with the displays.
5. Measure your heart rate if desired.
Current Segment
6. When you are finished exercising, remove the
16 16
The height of the flashing segment indicates the
speed setting for the current segment. At the end
of each segment, a series of tones will sound and
the next segment of the profile will begin to flash.
The new speed and incline settings will appear in
the display for a few seconds and the treadmill will
automatically adjust to the new speed and incline
settings.
The workout will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons. Note: When the next segment of
the workout begins, the treadmill will automati-
cally adjust to the speed and incline settings
for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
See step 5 on page 15.
See step 6 on page 15.
key from the console.
See step 7 on page 15.