Page 1
All manuals and user guides at all-guides.com ® Patent Pending USER'S MANUAL Model No. RBTL69921 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete sat-...
LIMITED WARRANTY ............. . .Back Cover Note: A PART LIST/EXPLODED DRAWING is attached in the center of this manual. REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International.
20. Do not change the incline of the treadmill by page 10. To purchase a surge suppressor, see placing objects under the treadmill. your local REEBOK dealer or call 1-800-806- 3651 and order part number 146148. 21. When folding or moving the treadmill, make...
Page 4
All manuals and user guides at all-guides.com 22. When using iFIT.com CDʼs and videos, an 25. Inspect and properly tighten all parts of the electronic “chirping” sound will alert you treadmill regularly. when the speed and/or incline of the treadmill 26.
And when youʼre not exercising, the unique calling. The model number of the treadmill is RX 820 can be folded up, requiring less than half the RBTL69921. The serial number can be found on a floor space of other treadmills.
All manuals and user guides at all-guides.com ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own 7/16”...
Page 7
All manuals and user guides at all-guides.com 4. Locate the Belly Pan Wire Harness (124). Route the Belly Pan Wire Harness over the Base (117) as shown. Connect the Belly Pan Wire Harness to the Wire Harness 55 124 (55). Be sure to insert the connectors properly (see drawing 4a).
Page 8
All manuals and user guides at all-guides.com 7. See the inset drawing. Identify the Right Top Handgrip (53); there are identifying marks inside the Handgrips. Set the Right Top Handgrip on the right Handgrip Post (41). Insert two 1/2” Screws (51) into the two holes in Left Right the Handgrip Post indicated by the arrows.
Page 9
All manuals and user guides at all-guides.com 10.Attach the Latch Assembly (37) and the Latch Spacer (39) to the Left Bottom Handgrip (40) with two Latch Ridge Screws (36). Firmly tighten the Latch Screws. Note: The ridge on the Latch Spacer must be on the side shown. If there are plastic ties around the left and right Pulse Sensor Plates (2), cut off the plastic ties.
HOW TO USE THE CHEST PULSE SENSOR All manuals and user guides at all-guides.com HOW TO PUT ON THE CHEST PULSE SENSOR dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than nec- The chest pulse sensor consists of two components: essary, draining the battery prematurely.
Adapter ing 1 at the right). To purchase a surge suppres- Surge Suppressor sor, see your local REEBOK dealer or call 1-800- 806-3651 and order part number 146148. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS).
Page 12
All manuals and user guides at all-guides.com CONSOLE DIAGRAM Manual/Program Indicators Display Program Display Display Program Profiles Note: If there is a thin sheet of plastic Clip on the face of the console, remove it. CAUTION: The console also features new iFIT.com interactive technology.
Page 13
All manuals and user guides at all-guides.com Each time a button is pressed, the speed setting HOW TO TURN ON THE POWER will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph.
Page 14
All manuals and user guides at all-guides.com Time/Incline/Segment Measure your heart rate, if desired. Time display—When the manual mode or the To measure your heart rate, use the chest pulse iFIT.com mode is se- sensor (see page 10) or the handgrip pulse sen- lected, this display will sor (follow the instructions below).
Page 15
All manuals and user guides at all-guides.com speed setting for the HOW TO USE PERSONAL TRAINER PROGRAMS Current Segment first segment will be shown in the flashing Insert the key fully into the console. Current Segment col- umn of the program dis- play.
Page 16
All manuals and user guides at all-guides.com To stop the program temporarily, press the Stop HOW TO USE HEART RATE PROGRAMS button. The Time/Incline/Segment Time display will begin to flash. To restart the program, press CAUTION: the Start button or the Speed button.
Page 17
All manuals and user guides at all-guides.com During heart rate pro- The speed and/or incline of the treadmill will then grams, the program change, if needed, to bring your heart rate closer to display will show a the target heart rate setting for the next segment. graphic that represents The program will continue until no time remains in your heart rate.
Page 18
All manuals and user guides at all-guides.com HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B.
Page 19
All manuals and user guides at all-guides.com HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A.
Page 20
All manuals and user guides at all-guides.com HOW TO CONNECT YOUR VCR HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B.
Page 21
All manuals and user guides at all-guides.com • Adjust the volume of your CD player or VCR. If the speed or incline settings are too high or too If the volume is too high or too low, the con- low, you can manually override the settings at any sole may not detect the program signals.
Page 22
All manuals and user guides at all-guides.com Return to the treadmill and stand on the foot HOW TO USE PROGRAMS DIRECTLY FROM rails. Find the clip attached to the key and slide OUR WEB SITE the clip onto the waistband of your clothes. When the on-screen countdown ends, the program Our Web site at www.iFIT.com allows you to access will begin and the walking belt will begin to move.
All manuals and user guides at all-guides.com THE INFORMATION MODE/DEMO MODE An “E” for english miles or an “M” for metric kilometers will The console features an information mode that keeps appear in the Speed/Min- track of the total number of hours that the treadmill has Mile display.
All manuals and user guides at all-guides.com HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the foot rail is securely held by the latch pin. 1.
Page 25
All manuals and user guides at all-guides.com PROBLEM: The power turns off during use SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in. b.
Page 26
All manuals and user guides at all-guides.com PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn;...
CONDITIONING GUIDELINES All manuals and user guides at all-guides.com WARNING: uses easily accessible carbohydrate calories for en- ergy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the tread- •...
Page 28
All manuals and user guides at all-guides.com Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED DRAWING/PART LIST for future reference. Handrail Spacer (43)–2 Base Leg Nut (70)–4 Foot Rail Washer (96)–10 Star Washer (113)–6 1/4”...
Page 29
PART LIST —Model No. RBTL69921 All manuals and user guides at all-guides.com R0803A No. Qty. Description No. Qty. Description No. Qty. Description Decal Console Base, Back Walking Platform Pulse Sensor Plate Right Top Handgrip Walking Belt Hood Cover Right Bottom Handgrip Latch Decal Motor Hood Wire Harness...
Page 30
EXPLODED DRAWING —Model No. RBTL69921 All manuals and user guides at all-guides.com R0803A...
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: • The MODEL NUMBER OF THE PRODUCT (RBTL69921) • The NAME OF THE PRODUCT (REEBOK RX 820 treadmill) ®...