Replacing The Processor - Compaq Evo D510 e-pc Upgrade Manual

Replacing the Processor

Ä
Upgrade Guide
1. Open the e-pc as shown in
2. Remove the system board as shown in
the System Board" on page 13.
3. Locate the processor (it is covered by a heatsink).
4. Unscrew the screws that secure the heatsink to the system board
and remove the heatsink.
CAUTION: If the processor is stuck to the heatsink, twist the heatsink
to break the seal. Never attempt to pry the heatsink from the processor
as doing so may pull the processor from its socket and irreparably
damage it.
screws
Upgrading and Replacing Hardware
"Opening the e-pc" on page 3.
"Removing or Replacing
processor (covered by heatsink)
screws
15