Compaq Evo D510 e-pc Upgrade Manual page 12

✎
Upgrade Guide
5. Remove the four screws securing the old hard drive to the tray
and pull the drive out of the tray.
screws
6. Insert a new drive in the tray and install the four drive-retaining
screws.
7. Insert the drive tray in the e-pc (the drive will only fit into the
tray one way).
8. Reattach the data and power cables.
9. Replace the chassis in the enclosure.
10. Verify the new configuration by checking the Summary screen.
To access the Summary Screen, press
startup, then press
To reinstall the operating system and drivers on the newly-installed
hard drive, use the Restore Plus! CD and operating system CD
provided with the e-pc. In addition, you can find the most up-to-date
versions of drivers on the support site at
http://www.compaq.com/support.
Upgrading and Replacing Hardware
F8
Esc.
screw
immediately after
9