Table of Contents
Advertisement
Image 3-24
Opening clamps
7. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby
the rigging clamps on the projector.
Image 3-25
Mounting to truss
8. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
9. Lock all four rigging clamps.
10.Install the safety cable. Hook one end into a provided hole. Route the cable around the truss and hook the other end into a
second hole in the carry handle.
R59770021 CLM R10+ 15/03/2010
3. Physical installation
29
Advertisement
Table of Contents
