Runco RS-1100 CineWide Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Runco Manuals
  4. Projector
  5. RS-1100
  6. Owner's operating manual

Runco RS-1100 CineWide Owner's Operating Manual

Rs-1100 series 1080p digital light processing projectors
Hide thumbs Also See for RS-1100 CineWide:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
O
'
O
M
W N E R
S
P E R A T I N G
A N U A L
RS-1100 Series
1080p Digital Light Processing
Projectors
TM
RS-1100
RS-1100 Ultra
RS-1100 CineWide
RS-1100 / SDC-1

Advertisement

Table of Contents
loading

Related Manuals for Runco RS-1100 CineWide

Summary of Contents for Runco RS-1100 CineWide

  • Page 1 ’ W N E R P E R A T I N G A N U A L RS-1100 Series 1080p Digital Light Processing Projectors RS-1100 RS-1100 Ultra RS-1100 CineWide RS-1100 / SDC-1...

  • Page 3: Two Year Limited Warranty

    (6) months or 1000 hours, whichever comes first, from the effective date of delivery to the end user. In addition, Runco will provide a new or rebuilt replacement lamp for the lamp that fails due to defects in materials or workmanship for a period of six (6) months or 1000 hours, whichever comes first, from the effective date of delivery to the end user.
  • Page 4 IMPORTANT -- WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.
  • Page 5 ADDITIONAL INFORMATION: To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this Limited Warranty, please call or write: RUNCO INTERNATIONAL, INC. Attn: Customer Service Department 2900 Faber Street Union City, CA 94587...

  • Page 6: Safety Precautions

    Safety Precautions Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation.

  • Page 7: Table Of Contents

    Notes on Remote Control Operation ..............13 Quick Setup .......................14 Installation Considerations ..................15 Installation Type ....................15 Ambient Light .......................15 Throw Distance.....................16 Vertical and Horizontal Position................18 Vertical and Horizontal Lens Shift................18 Folded Optics .......................21 Other Considerations ....................21 Runco RS-1100 Series Owner’s Operating Manual...
  • Page 8 Table of Contents Installing the Optional CineWide/AutoScope Lens Motor (RS-1100 Ultra only) ....21 Remove Projector Front Feet ................22 Install Anamorphic Lens Motor................22 Attach Ceiling Mount Extension Brackets..............23 Mounting the RS-1100 ....................24 Floor Mounting......................24 Ceiling Mounting ....................24 Adjusting the Projector Height or Projection Angle ..........24 Connections to the RS-1100 ..................25...
  • Page 9 5. Maintenance and Troubleshooting ................65 Lamp Replacement ....................65 Troubleshooting Tips ....................66 6. Serial Communications ..................69 RS-232 Connection and Port Configuration ...............69 Serial Command Syntax .....................69 7. Specifications ......................73 RS-1100 Specifications ....................73 RS-1100 Dimensions ....................76 RS-1100 Ultra Dimensions ..................77 Runco RS-1100 Series Owner’s Operating Manual...
  • Page 10 Table of Contents Notes: Runco RS-1100 Series Owner’s Operating Manual...
  • Page 11 3-3. Vertical Lens Shift (Example Only)................18 3-4. Horizontal Lens Shift (Example Only)................19 3-5. Folded Optics......................21 3-6. RS-1100 Ultra with AutoScope Lens Motor – Bottom View ........22 3-7. RS-1100 Ultra With Ceiling Mount Extension Brackets ..........23 3-8. Connecting the RS-1100 to the SDC-1 ..............25 3-9.
  • Page 12 List of Figures Notes: Runco RS-1100 Series Owner’s Operating Manual...

  • Page 13: Introduction

    Target Audience most out of the RS-1100. Runco has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Runco product manuals on-line, at www.runco.com.

  • Page 14: Using This Manual

    Installation instructions First-time configuration instructions Advanced configuration instructions Troubleshooting tips Specifications for the RS-1100 Series DLP Projectors The following are related Runco documents: Related Documents • Runco SDC-1 System Expansion Device Owner’s Operating Manual Runco RS-1100 Series Owner’s Operating Manual...

  • Page 15: Description, Features And Benefits

    The RS-1100 is equipped with a precision optics package offering a power zoom control and a throw range of 1.55 to 1.98 times the screen width. The RS-1100 Ultra provides even greater installation flexibility, with five lens options from which to choose offering throw distances ranging from 1.03 to 4.75 times the screen width.

  • Page 16: Key Features And Benefits

    • CinOptx™ Proteus lens options for stunning sharpness and throw distance flexibility (RS-1100 Ultra only) Parts List Your RS-1100 is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO. • RS-1100 or RS-1100 Ultra DLP Projector •...

  • Page 17: Controls And Functions

    2. Controls and Functions Figure 2-1 and Figure 2-2 show the key RS-1100 components. RS-1100 at a Glance Figure 2-1. RS-1100 Front/Side/Top View 1. RUNCO LOGO The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.
  • Page 18 To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees. 2. CABLE OPENING Pass cables through this opening. 3. CABLE ACCESS DOOR Open to access connectors. Runco RS-1100 Series Owner’s Operating Manual...

  • Page 19: Rs-1100 Rear Panel

    Input (RS-1100/SDC-1 and RS-1100 Ultra/SDC-1 only) DVI-style connector for connecting the SDC-1 System Expansion Device output to a RS-1100 or RS-1100 Ultra. (Connect your sources to the SDC-1 inputs.) Connect ONLY an SDC-1 to the R-Link input! Although the Note R-Link looks like a DVI input, it does not function like one and cannot be used as an additional video input.
  • Page 20 Runco CineWide with AutoScope system. 10. COMP 2 / RGB Five, BNC connectors for connecting either RGB or component (YPbPr) high-definition signal sources. (The RS-1100 automatically detects the signal format.) Runco RS-1100 Series Owner’s Operating Manual...

  • Page 21: Rs-1100 Remote Control

    Controls and Functions Figure 2-4 shows the RS-1100 remote control, and the paragraphs that follow describe its functionality. RS-1100 Remote Control LIGHT S-VID COMP1 COMP2 RGBHD HDMI INFO ENTER EXIT MENU CONT MEM1 FACT NIGHT LBOX VWIDE 16X9 CINEMA VCINE...
  • Page 22 Press to save menu item setting(s), exit the current menu and return to the previous one. ENTER Press to select a highlighted menu item or confirm a changed setting. MENU Press this button to show or hide the on-screen display (OSD) controls. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 23 Selects the Virtual Cinema aspect ratio, which anamorphically compresses a 2.35:1 image to fill a 16:9 image area. (The secondary anamorphic lens then “stretches” the image back to 2.35:1.) 8. 0 - 9 Use these keys to enter menu passcodes. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 24 Controls and Functions 9. Picture-In-Picture (PIP) / Picture-By-Picture (PBP) Controls: PIP and PBP are not available when the RS-1100 is used with the Note SDC-1 System Expansion Device. Press to activate PBP mode. Press to switch to the active window in PIP or PBP mode.

  • Page 25: Installation

    • Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation. • The Ø icon appears on the screen when you press a button for an unavailable function. Runco RS-1100 Series Owner’s Operating Manual...

  • Page 26: Quick Setup

    Installation Table 3-1 gives a quick overview of the RS-1100 installation process. The sections following this one provide detailed instructions. Quick Setup Installation should be performed by a qualified custom video Note installation specialist. Table 3-1. Installation Overview For Details, Refer to...

  • Page 27: Installation Considerations

    Images may then appear washed out and less vibrant. Runco RS-1100 Series Owner’s Operating Manual...

  • Page 28: Throw Distance

    Throw Distance (TD) = Screen Width (w) x Lens Throw Ratio RS-1100 Throw Ratio: 1.55 to 1.93 RS-1100 CineWide Throw Ratio: 1.86 to 1.93 RS-1100 Ultra Throw Ratio: refer to Table 3-3 Figure 3-1. Estimating Throw Distance Runco RS-1100 Series Owner’s Operating Manual...
  • Page 29 Installation Throw Ratio - RS-1100 Ultra: Table 3-3 lists the available lens options for the RS-1100 Ultra and their associated throw ratios. Table 3-3. RS-1100 Ultra Lens Options Throw Distance Range Throw Ratio ÷ (in inches, with 100-inch Wide Screen) Lens Option (Note 2) (Throw Dist.

  • Page 30: Vertical And Horizontal Position

    (1.5 x H) Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-3. Vertical Lens Shift (Example Only) Runco RS-1100 Series Owner’s Operating Manual...

  • Page 31: Horizontal Lens Shift (Example Only)

    Screen Width (W) Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or projector is used in this example. Figure 3-4. Horizontal Lens Shift (Example Only) Runco RS-1100 Series Owner’s Operating Manual...
  • Page 32 Installation Table 3-4 lists the lens shift limits for each available RS-1100 lens, as percentages and absolute measurements with a 100 x 56 inch (1.78:1) screen. Table 3-4. Vertical and Horizontal Lens Shift Limits Lens Option RS-1100 RS-1100 Ultra Proteus...

  • Page 33: Folded Optics

    Common sources of these include slide projectors, speakers, power amplifiers and elevators. If you are installing an RS-1100 Ultra with the optional CineWide with AutoScope system, proceed as follows to install the AutoScope lens motor. Otherwise, skip this step and Installing the Optional proceed with Mounting the RS-1100 (page 24).

  • Page 34: Remove Projector Front Feet

    Line up the eight mounting holes on the lens motor housing with those on the bottom of the projector. Secure the motor to the projector with the eight screws provided for this purpose, as shown in Figure 3-6. Figure 3-6. RS-1100 Ultra with AutoScope Lens Motor – Bottom View DO NOT OVER-TIGHTEN THE SCREWS. Caution...

  • Page 35: Attach Ceiling Mount Extension Brackets

    Installation If you are installing an AutoScope-equipped RS-1100 Ultra, use the supplied hardware to Attach Ceiling Mount attach the ceiling mount extension brackets to the bottom of the projector as shown in Extension Brackets Figure 3-7. For ceiling installations, these brackets bring the mounting points for the projector mounting plate (included with the ceiling mount kit) from the bottom of the projector up and around the lens motor housing.

  • Page 36: Mounting The Rs-1100

    Use only the Runco-approved ceiling mount kit designed for your Note projector. Install the mount kit according to the instructions provided with it.

  • Page 37: Connections To The Rs-1100

    If (and ONLY if) your installation includes an SDC-1 System Expansion Device: Connecting the SDC-1 System Expansion Device Use a Runco R-Link cable to connect the SDC-1 output to the RS-1100 R-Link input; see to the RS-1100 Figure 3-8. All signal sources should then be connected to the appropriate inputs on the rear panel of the SDC-1.

  • Page 38: Connecting Source Components To The Rs-1100

    If your installation does not include an SDC-1: Connect your video sources to the Components to the RS-1100 as shown and described in the sections that follow. RS-1100 HDMI/DVI Connections: See Figure 3-9. With an HDMI source, use the included HDMI-to-HDMI cable;...

  • Page 39: Progressive Component Video Connections

    Progressive Component Video Connections: Connect your progressive component source (DVD player or HD set top box) to the COMP 2/RGB input as shown in Figure 3-11. S-VID / DTV or Progressive Component (YPbPr) Source Figure 3-11. Progressive Component Video Connections Runco RS-1100 Series Owner’s Operating Manual...

  • Page 40: Composite, S-Video And Component Video Connections

    Installation Composite/S-Video/Component Video Connections: Use the included cables to connect your composite, S-Video and SD (480i) component video sources to the RS-1100 as shown in Figure 3-12. S-VID / DTV Source, DVD Player, VCR, Satellite Receiver etc. Figure 3-12. Composite, S-Video and Component Video Connections...

  • Page 41: Rs-232 Controller Connection

    Installation Connect a PC or home theater control/automation system (if present) to the RS-232 port RS-232 Controller on the RS-1100; see Figure 3-13. Use a standard, 4-wire RJ-11 telephone cable, wired Connection straight-through. For more information about using this connection, refer to Serial Communications on page 69.

  • Page 42: Connecting 12-Volt Trigger Output To External Theater Equipment

    Installation Connecting 12-Volt If your RS-1100 is equipped with a CineWide with AutoScope system, use the cable Trigger Output to External supplied with the AutoScope Lens Motor to connect the motor to the 12-volt trigger Theater Equipment output as shown in Figure 3-14.

  • Page 43: Connecting To Ac Power

    3. Turn on the main power switch at the rear of the projector. The POWER LED lights orange. The LAMP and TEMP LEDs light red briefly, then go out. 4. Press the ON button on the remote control to turn on the RS-1100. The POWER LED flashes orange to indicate that it is warming up.

  • Page 44: Changing The Osd Language

    Installation The RS-1100 OSD language is initially set to English, but can also display the menus in French, Spanish, Italian or German. To change the OSD language: Changing the OSD Language 1. Press MENU. 2. Select Installation from the Main Menu and press ENTER.

  • Page 45: Installing And Adjusting The Cinewide Anamorphic Lens

    RS-1100 Ultra/CineWide on page 38. If you are installing an RS-1100 Ultra/CineWide with AutoScope, continue with the next section. The RS-1100 Ultra Anamorphic lens mount kit consists of everything shown in Figure Anamorphic Lens 3-16. Some components shipped with your projector may differ slightly from what is Installation and shown in these instructions.
  • Page 46 Rotation Set Screws; see Figure 3-17. Then, attach the lens to the Lens Adapter Ring by threading it clockwise. Lens Rotation Set Screws LENS THREADS INTO RING Figure 3-17. Attaching the Anamorphic Lens to the Lens Ring Runco RS-1100 Series Owner’s Operating Manual...
  • Page 47 Virtual Cinema aspect ratio is selected. 6. Select the Cinema or Virtual Cinema aspect ratio to move the anamorphic lens into position, if it isn’t already. To do this, press CINEMA or VCINE on the RS-1100 remote control (Figure 2-4).
  • Page 48 Note properly adjusted, especially at shorter throw distances. If this is the case, Runco recommends that you slightly over-scan the image into the screen frame area to mask the distortion. Adjusting the Yaw: Loosen the Yaw/X-Adjustment Levers to allow the lens to pivot freely from side to side.
  • Page 49 4. When the image geometry appears correct, tighten the three Lens Rotation Set Screws to secure the lens in place. (When viewed from the front, the rear opening on the anamorphic lens should appear as a tall, narrow oval.) Runco RS-1100 Series Owner’s Operating Manual...

  • Page 50: Anamorphic Lens Installation And Adjustment - Standard Rs-1100/Cinewide Or Rs-1100 Ultra/Cinewide

    5 Y-Adjustment Screw, Phillips Pan-Head, 6-32 x 3/8" (4x) 6 Fender Washer (4x) Figure 3-18. Standard RS-1100 Anamorphic Lens Mounting Assembly - Exploded View 1. Use the Pitch Adjustment Screws (item #3) and Washers (item #6) to attach the Mounting Brackets (item #2) to the Anamorphic Lens (item #1).
  • Page 51 Runco recommends that you slightly over-scan the image into the screen frame area to mask the distortion. RS-1100 Ultra/CineWide (Cylindrical Lens): The RS-1100 Ultra Anamorphic lens mount kit consists of everything shown in Figure 3-19. Some components shipped with...

  • Page 52: Rs-1100 Ultra Anamorphic Lens Mounting Assembly - Exploded View

    Lens Adapter Ring Anamorphic Lens Figure 3-19. RS-1100 Ultra Anamorphic Lens Mounting Assembly - Exploded View 1. Use the Lens Rotation Set Screws (item #2) to attach the Lens Adapter Ring (item #8) to the Pitch Adjustment Yoke (item #7). (Use the curved, oval-shaped holes on the Pitch Adjustment Yoke.)
  • Page 53 To do this, loosen the Pitch Adjustment T-Screws on either side of the lens to allow it to pivot freely. Then, adjust the anamorphic lens angle so that the projected image is rectangular: Runco RS-1100 Series Owner’s Operating Manual...
  • Page 54 There may be some pincushion distortion even after the lens is Note properly adjusted, especially at shorter throw distances. If this is the case, Runco recommends that you slightly over-scan the image into the screen frame area to mask the distortion. Geometry: 1.

  • Page 55: Operation

    • Press TNT to adjust the hue of the image. For more information about these controls, refer to Picture Adjustment on page 46. When you turn on the RS-1100, it switches to the LIGHT last selected input and looks for a valid signal.

  • Page 56: Using Picture-In-Picture/Picture-By-Picture (Pip/Pbp)

    Operation PIP and PBP are not available when the RS-1100 is used with the Using Note SDC-1 System Expansion Device. Picture-In-Picture/ Picture-By-Picture (PIP/PBP) For PIP and PBP purposes, there are two groups PIP+ of inputs separated by their display modes: •...

  • Page 57: Aspect Ratio

    PIP/PBP Set Up (not available when Video in Graphic used with the SDC-1) PBP Off PBP Set Up Graphic by Video Video by Graphic 0, +1, +2, ... +15 Figure 4-1. RS-1100 OSD Menu Structure Runco RS-1100 Series Owner’s Operating Manual...

  • Page 58: Main Menu

    Installation Option Set Up ISF Calibration Picture Adjustment Use the controls in the Adjustment Menu to calibrate your RS-1100 for optimum picture quality. To access the Adjustment menu, press MENU, highlight the active source and press ENTER or Adjustment Brightness To adjust a setting, use the button to highlight it and press ENTER.
  • Page 59 Operation Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program material, Runco recommends using the following calibration tools for best results: • External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent.
  • Page 60 Color Saturation: On your external test pattern source, select a color bar pattern like the one shown in Figure 4-4. Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint Runco RS-1100 Series Owner’s Operating Manual...
  • Page 61 Like the brightness and contrast controls, the color and tint controls Note are interactive. A change to one may require a subtle change to the other in order to achieve the optimum setting. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 62 (2), both (3) or neither (0). • With a 480p or higher-resolution signal, the sharpness control is applied only to the output signal and only when you set the Sharpness Filter to “on” (1). Runco RS-1100 Series Owner’s Operating Manual...

  • Page 63: Aspect Ratio

    Operation Color Temperature: The RS-1100 has five memory settings for Color Temperature: • 5400 kelvins Color Temperature • 6500 kelvins 6500 • 8500 kelvins • Custom 1 • Custom 2 Custom 1 and Custom 2 are installer-adjustable and can be used to create custom settings.
  • Page 64 Select Cinema to view 2.35 source material on a 16:9 screen. The upper and 2.35:1 Image on lower portions of the screen 16:9 Screen are masked, but the geometry of the active image area is not changed. Runco RS-1100 Series Owner’s Operating Manual...

  • Page 65: Installation

    Picture Orientation: Press the button to change the orientation of the projected image. The RS-1100 can be installed on a ceiling or in a rear-screen configuration with one or more mirrors. There are four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.

  • Page 66: Option

    • H. Pos.: Adjusts the horizontal position of the image. • V. Pos.: Adjusts the vertical position of the image. To adjust the image position with a 480i source, use the Image Note Shift controls in the Set Up menu (see page 59). Runco RS-1100 Series Owner’s Operating Manual...

  • Page 67: Set Up

    Offset, select Store Custom 1 or Store Custom 2 to store your settings. To recall them, set the Color Temperature to Custom 1 or Custom 2 in the Image Adjustment menu (refer to Picture Adjustment on page 46). Runco RS-1100 Series Owner’s Operating Manual...
  • Page 68 Analog RGBHV high-definition source material. These controls allow you to make adjustments Analog YPbPr independently for each HD signal type (as opposed to the per-input controls in the Picture Signal Fine Tune Adjustment menu). Runco RS-1100 Series Owner’s Operating Manual...

  • Page 69: Gain And Offset

    7.5 IRE) or in the Video Black Level sub-menu (refer to Video Black Level on Pr Gain +135 page 60). Pb Offset • Adjust the Gain and Offset for the Pb and Pr channels. These controls only affect Pr Offset component high-definition signals. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 70 Post Coast source is known to be producing black. The analog-to-digital converter in the SOG Threshold RS-1100 uses the input signal at this point as its black level reference and Overscan Rate processes all other signal levels accordingly. Clamp Place is the number of pixel periods (1 to 255 inclusive) that should pass after the trailing edge of H-sync before clamping starts.
  • Page 71 (These controls are available only with a 480i source signal.) • Horizontal: This control moves the image right or left within the area of available pixels. • Vertical: This option moves the image up or down within the area of available pixels. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 72 Remote Control: The Remote Control menu shows you the primary and secondary infrared (IR) codes to which the RS-1100 will respond. The Primary IR code is permanently set to +20. The secondary IR code is also +20.
  • Page 73 • Set the Screen Trigger Mode to AutoScope if you want the trigger to activate when the Cinema or Virtual Cinema aspect ratio is selected. Choose this setting if your RS-1100 is equipped with the Runco CineWide with AutoScope system.

  • Page 74: Isf Calibration

    For best results, adjust tint while displaying an external color bars test pattern (see Figure 4-4). Otherwise, it is recommended that Hue remain at its default setting. When you have finished customizing the color space, select Store Setting and press ENTER. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 75 Select from 5 to 60 seconds, in 1-second increments. When finished, press EXIT. ISF Enable: Use ISF Enable to control the display of the ISF logo on the RS-1100 splash screen upon power-up. Return to User OSD: To exit the ISF Calibration menu, use the up- or down-arrow keys to highlight Return to User OSD and press ENTER.
  • Page 76 Operation Notes: Runco RS-1100 Series Owner’s Operating Manual...

  • Page 77: Maintenance And Troubleshooting

    Maintenance and Troubleshooting The lamp should be replaced when it reaches the end of its life (typically 2000 hours), or sooner if a noticeable degradation in brightness occurs. Contact your Runco dealer to Lamp Replacement obtain a replacement lamp. 1. Turn off the projector and unplug the power cord.

  • Page 78: Troubleshooting Tips

    Maintenance and Troubleshooting Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the RS-1100. If the suggested solutions fail to resolve the problem or if you Troubleshooting Tips encounter an issue not described here, please contact Runco Technical Support.
  • Page 79 Ensure that the intake and exhaust vents are not blocked. Turn the projector back on. If the problem persists, please contact your Runco dealer for assistance. Runco RS-1100 Series Owner’s Operating Manual...
  • Page 80 Maintenance and Troubleshooting Notes: Runco RS-1100 Series Owner’s Operating Manual...

  • Page 81: Serial Communications

    Serial Communications To interface the RS-1100 with a home theater automation/control system or a PC running terminal emulation software: RS-232 Connection and Port Configuration 1. Connect it to your control system or PC as shown in Figure 3-13. 2. Start a terminal session on your PC using a terminal-emulation program, such as HyperTerminal.
  • Page 82 Letterbox aspect ratio x064x VirtualWide aspect ratio x065x Cinema aspect ratio x066x Virtual Cinema aspect ratio x071x RS-232 baud rate = 9600 x072x RS-232 baud rate = 38400 x073x RS-232 baud rate = 115200 Runco RS-1100 Series Owner’s Operating Manual...
  • Page 83 Zoom In (incremental) x265x Focus (rotate lens to right) x266x Focus (rotate lens to left) x267x RVR = +1 (larger aperture) x268x RVR = -1 (smaller aperture) x281x Vertical Lens Shift = Max. Up Runco RS-1100 Series Owner’s Operating Manual...
  • Page 84 Zoom = Max. Out x284x Zoom = Max. In x285x Focus (rotate lens to right, full-range) x286x Focus (rotate lens to left, full-range) x287x RVR = Full On (open) x288x RVR = Full Off (closed) Runco RS-1100 Series Owner’s Operating Manual...

  • Page 85: Specifications

    Recommended Width: 72 in. (1.83 m) to 96 in. (2.44 m) Capable of screen widths between 48 in. (1.22 m) and 200 in. (5.08 m) Throw Distance RS-1100: 1.55 to 1.93 (1.86 to 1.93 with CineWide) (Factor x Screen Width): RS-1100 Ultra: Refer to Table 3-3 Horizontal and Vertical...
  • Page 86 Contrast Ratio: 1500:1 to 3100:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays.
  • Page 87 Specifications Table 7-1. RS-1100 Specifications (continued) Weight (without lens): RS-1100: 34 lbs. (15.42 kg) RS-1100 Ultra: 36 lbs. (16.33 kg) Regulatory Approvals: Complies with FCC, CE C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user.

  • Page 88: Rs-1100 Dimensions

    Specifications Figure 7-1 shows the RS-1100 dimensions. RS-1100 Dimensions 9.84 in. (250.00 mm) 19.69 in. (500.00 mm) 17.32 in. (440.00 mm) 8.86 in. (225.00 mm) 2.17 in. (55.00 mm) 9.25 in (235.00 mm) 12.99 in. 1.38 in. (35.00 mm) (330.00 mm) 17.72 in.

  • Page 89: Rs-1100 Ultra Dimensions

    Specifications Figure 7-2 shows the RS-1100 Ultra dimensions. RS-1100 Ultra Dimensions 13.59 in. (345.1 mm) 6.09 in. (154.6 mm) 1.17 in. (29.7 mm) 18.50 in. (469.8 mm) Figure 7-2. RS-1100 Ultra Dimensions Runco RS-1100 Series Owner’s Operating Manual...
  • Page 90 Specifications Notes: Runco RS-1100 Series Owner’s Operating Manual...
  • Page 92 S ER IAL N UM B E R RUMA-011215 rev 08-16-06 v1.0 Runco International • 2900 Faber Street • Union City, CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www.runco.com Runco CL-810 Owner’s Operating Manual...

This manual is also suitable for:

Rs-1100 ultraSdc-1Rs-1100/sdc-1

Table of Contents